BISSELL Little Green Multi-Purpose Portable Carpet and Upholstery Cleaner, Car and Auto Detailer, Green, 1400B

• Every purchase saves pets. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets
• Powerful mess cleanup. Cleans dirt, grime and stuck on messes
• Now with 5X the fragrance. inspired by cool, fresh pine needles with vanilla bean & eucalyptus
• Helps your machine clean better. Formulated with special cleaning agents to clean better than water alone
• Engineered for use with BISSELL CROSSWAVE machines. Use as directed with other leading hard surface & area rug cleaning machines
• Virtually streak-free clean
• Earth-friendly formula. Made with biodegradable detergents, and without heavy metals, phosphates or dyes
• Pet and family safe. When used as directed

Bissell Little Green Multi-Purpose Compact Deep Cleaner Strong spray and suction contains at least 50% recycled plastic. 3 inch stain tool helps you scrub stains away. Dimensions: 13.8 pounds Check for suction at the back of the unit after removing the hose where it attaches to the back of the unit. If there IS suction at the back of the machine with the hose removed, follow these steps: Unplug the unit from the outlet. Check the Pre- and Post-Motor filters for debris. Dirty filters can restrict airflow. The Pre-Motor Foam Filter is square. You can find it in a pull-out tray under the Dirt Tank. The Foam Filter may be hand washed in cold water with mild detergent. Reinstall the filter when it’s completely dry. The Multi-Layer Post-Motor Filter is rectangular. It can be found on the side of the machine. *Note: The white Multi-Layer Post Motor Filter isn’t washable. Make sure the dirt tank is empty. Check the upper tank for build-up or clogs. If it needs to be cleaned, use a short, Phillips-head screwdriver and take off the separator plate with a cloth (can be dampened with water or mild detergent). Replace dirt tank. Check for good suction at the end of the upholstery hose. If there’s good suction, make sure the hose is connected firmly to the lower hose on the back of the vacuum. If there’s no suction, check the hose for splits, cracks, or clogs. Make sure the Brush Roll is rotating. If it isn’t, take the access plate off and examine the brush and belt for damage. The access panel can be taken off by lifting the four tabs on the bottom of your machine. Clearing clogs detach the Upper Hose from the machine. Insert a broomstick into the hose to push any obstruction through. Remove the screw from the left side of the lower hose on the back of the unit. Straighten this section of hose by pulling it down or laying the unit on its side with the lower hose towards the top side. Look through the hose for any obstruction. Use a broomstick to unclog the hose. Power source - corded. Power rating: 3 amps.